Four-pin I2C interface
Connect GND, VCC, SCL and SDA only after checking the module’s printed pin order.
$4.15
DISPLAY MODULE1 MODULE
A slim white 128×32 OLED module with an SSD1306 controller, four-pin I2C interface and 3.0–5.0V supply range.
- 0.91-inch white OLED
- 128×32-pixel resolution
- SSD1306 controller with I2C interface
- Four-pin header included
Header soldering and controller setup are required. Confirm pin order and the I2C address used by your software.
91 in stock
DISPLAY MODULE
A narrow OLED status display for compact projects
This self-emitting 128×32 module suits Arduino-class controllers and other compatible 3.0–5.0V I2C projects where a low-profile display is preferred.
0.91 indisplay size
128×32pixel resolution
3.0–5.0Vsupply range
SSD1306display controller
KEY DETAILS
What this item is designed to do
Compact outline
The 38 × 12 mm board format fits narrow status displays and small control panels.
White self-emitting pixels
OLED technology does not require a separate backlight and provides a wide stated viewing angle.
What is included
- 1 × 0.91-in 128×32 white OLED module
- 1 × four-pin header
Check before ordering
- Header requires soldering
- Confirm voltage, pin order and I2C address
- Protect the display glass and avoid board flex
- Controller and software library are not included
SPECIFICATIONS
Product details at a glance
Display size0.91 in
ColorWhite
Resolution128 × 32 pixels
DriverSSD1306
InterfaceI2C / IIC
Supply3.0–5.0V
Outline38 × 12 × 3.5 mm
Active area22.38 × 5.584 mm
Stated viewing angle160°
Pins4
Weight2.23 g
UPC / EAN766133579119
I2C setup note
Scan the I2C bus and configure the library for a 128×32 panel rather than assuming an address or display height. Follow the linked tutorial for a working Arduino example.
SHOP & SUPPORT
Need help choosing a part?
Open the tutorial, browse related DIY electronics or contact PlantMate for a module dimension check.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.