-
×
85cm 4 Pin Mini USB to Open End 28AWG Cables (3-Pac)
1 × $9.75 -
×
85cm 4 Pin Micro USB to Open End 28AWG Cables (3-Pac)
1 × $9.75 -
×
Plastic NPT ½ Inch Female Thread to ¼ Inch and 3/8 Inch Barb Hose Tubing Pipe Fitting Connector Set (4 Pack)
1 × $9.00 -
×
Power Regulator and Wire connector PCB for NEMA23 Stepper Motor and 80KG 10A Servo with Arduino
1 × $39.99
$4.15
- 0.91-inch OLED with White Display color.
- 128×32 resolution.
- OLED display without backlight needs.
- Low power dissipation.
- Wide viewing angle at least 160 degrees.
- Diver IC: SSD1306 with I2C interface.
- Voltage: 3.0V-5.0V.
- Compatible with Arduino.
- Click here to see the DEMO project.
93 in stock
0.91″ White OLED Display Module Features:
OLED display, no backlight needs, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. Very good viewing angles of at least 160 degrees.
DEMO project link: http://plantmate.ca/0-91-inch-oled-display-with-arduino-pro-mini-3-3v-tutorial/
| Screen Display Size | 0.91inch |
| Display Color | White |
| Brightness: | 80cd/m2 |
| OLED Resolutions | 128×32 pixels |
| Outline dimension | 38×12×3.5mm |
| Active area | 22.38×5.584mm |
| Pixel pitch | 0.175×0.175mm |
| Pixel size | 0.159×0.159mm |
| Wide viewing angle | 160 Degree |
| Driver IC | SSD1306 |
| Voltage | 3.0 – 5.0V |
| Interface | IIC |
| Operating temperature | -40~70℃ |
| Storge Temperature | -40~85℃ |
| Assemble | Soldering |
| Pins | 4P |
| PIN Interface | IIC or SPI optional, works on I2C (default at address 0x78) |
| Compatible | Arduino |
| Weight | 2.23g |
| UPC/EAN | 766133579119 |
Pin Assignments:
| Pin | Description |
| GND | Ground |
| VCC | 3.3V or 5V power supply |
| SCL | I2C SCL (clock signal) |
| SDA | I2C SDA (data signal) |
Package Content:
- 1*0.91 Inch OLED Display Module;
- 1* 4 pin header.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.