0.96-in SSD1306 OLED Display, 128×64 White (2-Pack) 
Normally closed
The valve blocks flow without coil power and opens only while the correct supply is applied.
$35.00
WATER-CONTROL COMPONENTS2 VALVES
A pair of normally closed 12V water valves with 1/2-inch and 3/4-inch male-thread sizes.
- One 1/2-inch and one 3/4-inch valve
- Normally closed, one-way water flow
- 12V DC, 300 mA listed rating
- Matching female couplers and protective caps included
These diaphragm valves require the stated minimum water pressure and must be installed in the marked flow direction.
Out of stock
WATER-CONTROL COMPONENTS
Switch two common water-line sizes with 12V control
When the coil receives the correct 12V supply, the valve opens in the arrow-marked direction. Without power it returns to the normally closed state.
12V DCrated coil voltage
300 mAlisted current
3 PSIstated minimum pressure
2valve sizes in the pack
KEY DETAILS
What this item is designed to do
One-way flow
Follow the arrow molded into the valve body; the internal diaphragm is designed for one direction.
Pressure required
This is not a zero-pressure gravity valve. The listing specifies at least 0.02 MPa / 3 PSI.
What is included
- 1 × 1/2-in male-thread solenoid valve
- 1 × 3/4-in male-thread solenoid valve
- 1 × 1/2-in female-to-female connector
- 1 × 3/4-in female-to-female connector
- 2 protective electrical caps
Check before ordering
- Requires regulated 12V DC control and appropriate switching hardware
- Observe the arrow-marked flow direction
- Supply pressure must remain within the listed range
- Use suitable thread sealing, strain relief and water-safe enclosure practices
SPECIFICATIONS
Product details at a glance
Valve typeNormally closed, one-way
Rated voltage12V DC
Rated current300 mA
Fluid listedWater
Water temperature0°C to 55°C
Pressure range0.02–0.8 MPa
Thread sizes1/2 in and 3/4 in male
Operating environment0°C to 40°C; <95% RH at 25°C
Listed combined weightApproximately 236 g
Controller and pressure note
Do not drive a solenoid coil directly from a microcontroller pin. Use a correctly rated driver, flyback protection and power supply, and test the plumbing for leaks while supervised.
SHOP & SUPPORT
Need help choosing a part?
Browse DIY water-control parts or ask PlantMate to check the valve, driver and pressure requirements for a project.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.