Clear PVC Tubing — 8mm ID × 10mm OD, 30ft (9.1m) 
USB Brushless Submersible Mini Water Pump, 3.5–9V (2-Pack) 
Power domains
The design separates the higher-current servo supply from the 5V logic used by the controller and peripherals.
$39.99
DIY CONTROL PCBADVANCED BUILD
A PlantMate-designed PCB platform for integrating Arduino Nano logic, motor-driver signals, encoder feedback, servo power and an I2C OLED in a custom motion-control project.
- 9–35V stated input range
- 7.4V high-current and 5V logic sections
- TB6600, encoder, servo and OLED interfaces
- Designed around an Arduino Nano controller
This is advanced DIY electronics hardware. Confirm the supplied board configuration and every external component before ordering.
DIY CONTROL PCB
Power and signal routing for a motion-control build
The board layout groups high-current conversion, 5V logic, step/direction control, rotary-encoder feedback, servo output and an I2C display connector for the PlantMate tubing-cutter and related prototypes.
9–35Vstated DC input
7.4Vservo rail design
5Vlogic rail design
Arduino Nanocontroller footprint
KEY DETAILS
What this item is designed to do
Motion interfaces
Connection points are described for a TB6600 stepper driver, rotary encoder and high-current servo.
Display and expansion
An I2C OLED header and accessible controller signals support status display and project-specific code.
What is included
- 1 power-regulator and wire-connector PCB listing as shown in the product gallery
Check before ordering
- Confirm whether the supplied board is bare, partially populated or fully assembled
- Motors, driver, servo, Arduino, OLED, encoder and power supply are not stated as included
- Soldering, wiring, firmware and safe enclosure work may be required
- High-current design work requires appropriate fusing, wire gauge, cooling and strain relief
SPECIFICATIONS
Product details at a glance
Design input9–35V DC
Main converter designXL4016 adjustable buck section
Servo rail design7.4V
Logic regulator designLM2596S 5V section
Controller footprintArduino Nano
Stepper interfaceTB6600 step/direction
Display interface4-pin I2C OLED
Project SKUSSC-A23-PLANTMATE
VersionXL4016_SMD_14.2
Listed shipping weight0.3 kg / 0.67 lb
Confirm the supplied configuration
The current description explains the circuit design but does not clearly identify which modules and connectors arrive populated. Contact PlantMate before purchasing if the exact assembly state is important to your build.
SHOP & SUPPORT
Need help choosing a part?
Open the project guide or ask PlantMate to confirm the board version, supplied parts and electrical requirements.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.