$79.99
PLANTMATE G2 PMWC-02 FIRMWARE V5.0.1
Two independent watering zones with soil-moisture control, flexible Timer Mode and a clear local dashboard.
No PlantMate cloud account required. Optional Telegram controls can be configured for remote access.
Out of stock
G2 combines moisture-guided watering for two individually monitored plants with flexible scheduled watering for a larger group of pots. Configure both channels, see live readings and review watering history from the local PlantMate dashboard.
Use independent soil-moisture control where precision matters, or a supervised scheduled setup when you want to branch a pump line across several pots.
Each channel has its own moisture sensor, pump, target, settings, history and WATER ERROR protection.
Split either pump line through compatible branch tubing and nozzles to serve several pots for a set duration.
Open the local dashboard from a phone, tablet or computer on your home Wi-Fi to review soil moisture, temperature, humidity, light, recent activity, settings and watering status. The OLED and physical controls remain available at the device.
Automatic watering is disabled when G2 first ships. Finish the water connections, Wi-Fi setup, channel settings and supervised testing before enabling unattended watering.
Install the two halo rings and soil-moisture sensors in the pots.
Put the pumps in a clean water container, connect the tubing and check every outlet.
Use the included USB-PD 9V adapter and USB-C cable, then join your 2.4 GHz home Wi-Fi.
Name each plant, choose a mode, calibrate Sensor Mode and run a supervised test.
A Sensor Mode problem on one plant does not stop the other plant’s normal watering routine.
Review moisture charts, watering markers, environmental trends, recent activity and statistics.
Add a FAT32 microSD card up to 16 GB for extended CSV sensor logging and exports.
Configure owner-only alerts and remote commands for status, watering, pause, stop and error clearing.
Use the OLED information screens, status LEDs and maintenance controls directly at G2.
Sensors and Sensor Mode watering continue without internet. The local dashboard requires home Wi-Fi.
For a multi-pot Timer Mode layout, additional branch fittings, tubing and nozzles may be required.
Yes. In Timer Mode, either pump line can be split through compatible branch tubing and nozzles to serve several pots. Timer Mode runs for the set duration and does not measure or verify each pot’s moisture, so balance the branches and test every outlet while supervised. Sensor Mode independently monitors up to two plants.
Sensor readings, the OLED and Sensor Mode watering continue without internet access. The local dashboard needs a connection to your home Wi-Fi. Internet access is recommended for time synchronization, firmware checks and optional Telegram remote access; a Timer Mode schedule needs a valid clock after a fresh startup.
No PlantMate cloud account is required for the local dashboard. Optional Telegram remote access uses the bot and owner chat ID that you configure in G2 settings.
No. Normal watering, the OLED and the local dashboard work without one. A compatible FAT32 microSD card up to 16 GB is optional for extended CSV logging.
G2 flags the affected plant and can alert you, while the other channel continues its normal Sensor Mode routine. Check the reservoir, pump inlet, tubing and the sensor’s position within the wetted area before clearing the error.
Open the current G2 user guide for guided Wi-Fi setup, plant calibration, safe reset procedures, Telegram configuration and firmware update instructions.
Use the current G2 manual for calibration and troubleshooting, review the v5.0.1 update notes, or contact PlantMate support if you need help identifying a part or planning a multi-pot layout.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.