Measure before watering
The soil sensor determines whether watering is needed instead of relying on a fixed timer alone.
Sale!
Original price was: $69.99.$49.99Current price is: $49.99.
PLANTMATE G1PMWC-01 · V06.3
Soil-moisture-controlled automatic watering for one indoor potted plant, with adjustable target, flow and maximum watering time.
- Waters according to measured soil moisture
- 0–98% adjustable target in 2% steps
- Low, Medium or High pump flow
- Battery or regulated 5V USB-C power
Batteries, USB power supply, USB-C cable and water reservoir are not included.
PLANTMATE G1
Simple moisture-guided care for one plant
G1 checks the soil, waters only when the reading is below the selected target and then checks the response. It sleeps between routine checks to conserve battery power while keeping essential settings available on the Cube.
1indoor potted plant
0–98%moisture target
3pump-flow levels
2–20 secmaximum water time
WATCH THE COMPLETE GUIDE
Setup, calibration and everyday operation
Follow the complete PlantMate G1 setup and user guide, including connections, first-time calibration, settings, watering logic, alerts and safe operation.
KEY DETAILS
What this item is designed to do
Water and recheck
G1 can run up to three watering cycles with a 15-second soak between attempts and stops after the soil response reaches its stable target condition.
Sleep between checks
After setup, the Cube normally sleeps and wakes about every six hours; press Wake Up whenever you want to view the current status.
In the package
- PlantMate G1 / PMWC-01 Watering Cube
- 1 soil-moisture sensor
- 1 water pump
- Water tubing
- 1 halo watering ring
- 3 support sticks
- Quick Setup Guide
You also need
- Four matching 1.5V alkaline AA batteries or a regulated 5V USB supply
- USB-C cable when using external power
- A clean water reservoir
- Time to observe and tune settings for the plant, soil and pot
SPECIFICATIONS
Product details at a glance
ModelPlantMate G1 · PMWC-01
Intended useOne indoor potted plant
Moisture target0–98% in 2% steps
Pump flowLow, Medium or High
Maximum water time2–20 seconds in 2-second steps
Routine check intervalApproximately every six hours
Power4 × 1.5V alkaline AA batteries or regulated 5V USB-C
AlertsBlue refill indicator; red low-battery indicator
UPC766133582898
Package20 × 19.6 × 7 cm; 554 g / 1.22 lb
WarrantyOne-year limited warranty
Placement and setup note
Keep the Cube and every electrical connection dry; only the pump is intended to be submerged. Place the moisture sensor where the water reaches it, start with supervised tests and adjust settings after observing the soil response.
SHOP & SUPPORT
Need help choosing a part?
Open the current V06.3 guide, compare G1 with newer PlantMate models or contact support for setup help.
Only logged in customers who have purchased this product may leave a review.
Related products
Out of stock
Sale!
Original price was: $29.99.$19.99Current price is: $19.99.
Reviews
There are no reviews yet.