4×AA Battery Enclosure — 3D Model Download 
0.91-in SSD1306 OLED Display, 128×32 White 
1/2-in FNPT to 1/4-in & 3/8-in Barb Fittings (4-Pack) 
Measure the feed
The project uses a stepper-driven motion system and optical/infrared sensing to track tubing movement and length.
$460.52
DIY PROJECT KITPHYSICAL HARDWARE
A coordinated hardware set for building the automatic tubing measurement and cutter project documented on PlantMate.ca.
- Matched to the PlantMate project guide
- 12V system with Arduino-class 5V logic
- Stepper-driven measurement and servo/motor cutting design
- Full current item list available as a PDF
Review the current Hardware List PDF before ordering. Printed parts, tools, guards and project-specific consumables are not assumed unless listed.
DIY PROJECT KIT
Start the tubing-cutter build with matched hardware
This physical kit groups the electrical and mechanical parts referenced by the PlantMate automatic tubing measurement and cutter tutorial. The project still requires careful assembly, wiring, testing and safe guarding.
12V DCproject power input
5V logicArduino-class control
4–8 mm ODlisted tubing range varies by printed parts
3.9 kglisted package weight
KEY DETAILS
What this item is designed to do
Control the cut
The cutting mechanism is servo- or motor-driven depending on the documented kit revision and printed parts.
Build from the guide
Use the project article, current hardware-list PDF and matching 3D files together rather than relying on an older parts list.
Current kit reference
- Physical hardware specified in the current Hardware List PDF
- Matched motor, control, sensing and mechanical components for the PlantMate tutorial
- Parts supplied in the configuration shown in the current product gallery
Confirm before ordering
- Open the Hardware List PDF and compare it with your existing parts
- 3D-printed parts or digital model files are not assumed included
- Confirm the cutter mechanism and kit revision used by the latest guide
- Provide tools, safe guarding, wiring consumables and assembly workspace
SPECIFICATIONS
Product details at a glance
Product typePhysical DIY hardware kit
Project power input12V DC
Controller logicArduino-based, 5V logic
Drive systemStepper motor and driver
Measurement methodOptical / infrared tubing detection and length counting
Cutting methodServo-driven cutter or motor blade, depending on kit revision
Listed tubing range4–8 mm OD; depends on printed parts
Assembly difficultyEasy to moderate
Suggested toolsScrewdriver, wire stripper and optional basic soldering tools
Package34 × 28.5 × 15 cm; 3.9 kg / 8.6 lb
Moving-blade and assembly warning
This is a DIY machine project, not a finished guarded appliance. Disconnect power before adjustments, protect hands from the cutter and drive system, add suitable guards and emergency controls, and supervise every test.
SHOP & SUPPORT
Need help choosing a part?
Open the build guide and hardware list, download the matching 3D parts separately, or ask PlantMate to confirm a kit revision.
| Weight | 3.9 kg |
|---|---|
| Dimensions | 34 × 28.5 × 15 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
Out of stock
Reviews
There are no reviews yet.